Filter
Top Products
FR70 Owner’s Manual 41
Appendix
Troubleshooting
Problem Solution/Answer
The buttons do not
respond. How do I
restart the FR70?
Press and hold MODE and ENTER simultaneously to
restart the FR70 software. You must reset the time and
your custom settings. If you are still having problems,
remove and then replace the battery (see page 35).
How do I clear all
user data?
This procedure deletes all information that you have
entered. Press and hold MODE, LIGHT/
, and ▲
simultaneously. This also restores the factory settings.
Workout data is deleted.
How do I set the
time to AM or PM?
Verify that the time mode is set to 12 (12 hour). Press
/▼ to select the correct hour. The A or P icon
appears below the seconds on the time page. For more
information, see page 15.
The FR70 will not
send data to my
computer.
See page 28 to enable computer pairing.
The heart rate
monitor or foot pod
will not pair with the
FR70.
• Stay 10 m away from other ANT sensors while
pairing.
• Bring the FR70 within range (3 m) of the heart rate
monitor while pairing.
• If the problem persists, replace the battery.
How do I change
the time?
See page 15 to set the time.