Filter
Top Products
26
Press the STOP button again and enable or
disable the TV.
To make the TV available for use, press the + or –
button above the ENTER AGE/WT button until the
words TV POWER ON appear in the main display.
To prevent the TV from being used, press the + or
– button until the words TV POWER OFF appear.
If you have disabled the TV, go to step 6. If
you have enabled the TV, go to step 3.
Press the STOP button again and select a
cable TV connection or an antenna connection.
If you are using a cable TV connection, press the +
or – button above the ENTER AGE/WT button until
the words TV MODE CABLE STATIONS appear
in the main display. If you are using an antenna
connection, press the + or – button until the words
TV MODE AIR STATIONS appear.
Press the STOP button again and program TV
channels.
The console has the capability to find and store in
memory all of the valid TV channels in your area.
While the words PRESS CHANNEL UP TO SCAN
TV CHANNELS are scrolling across the main dis-
play, press the CHANNEL + button to start the
channel scanning process.
The console will begin scanning all TV channels. If
no broadcast signal is detected on a channel, the
channel will be skipped; if a signal is detected, a
tone will sound and the channel will be stored in
memory. This process will continue until the high-
est channel is reached. The lowest channel stored
in memory will then appear in the main display.
Press the STOP button again and delete or add
TV channels.
After all valid TV channels have been stored in the
console’s memory, you can delete unwanted
channels or add other channels. To delete or add
a channel, first press the CHANNEL + and – but-
tons until the channel appears in the main display.
To add the channel, press the + or – button above
the ENTER AGE/WT button until the word
DELETE appears in the main display; to delete the
channel, press the + or – button until the word
ADD appears. Then, select the next channel that
you want to delete or add. Repeat this process
until you have finished deleting or adding chan-
nels.
Remove the key to exit the information mode.
When you are ready to exit the information mode,
remove the key from the console.
6
5
4
3
2