Filter
Top Products
25
HOW TO USE THE TELEVISION
Whether you select the manual mode, a program, or
the iFIT.com mode, the personal TV will allow you to
enjoy the programs of your choice while you exercise.
Note: For the television to operate, an antenna, a
CATV cable, or a VCR must be connected to the tread-
mill. See page 9 for connecting instructions.
To use the personal TV, follow the instructions below.
Insert the key fully into the console.
See GETTING STARTED on page 13.
Select the desired channel.
Press the CHANNEL + and – buttons to select a
channel. The selected channel will appear in the
main display. Note: The console has the capability
to find and store in memory all of the valid TV
channels in your area. See pages 25 and 26 for in-
structions. If a satellite receiver, VCR, or DVD
player is connected, the channel must be changed
at the satellite receiver, VCR, or DVD player.
Put on headphones (not included) if desired.
To listen to television
programs using head-
phones, plug your
headphones into the
indicated jack on the
left side of the con-
sole.
Adjust the volume.
Press the VOLUME + and – buttons to select the
desired volume. The selected volume setting will
appear in the main display.
When you are finished using the TV, remove
the key.
See step 6 on page 17.
THE INFORMATION MODE
The console features an information mode that allows
you to access information and to view and change
various settings. Follow the steps below to use the
information mode.
Hold down the STOP button while inserting the
key.
When the information mode is selected, the main
display will show the following information:
The left side of the main
display will show the
total number of hours
that the treadmill has
been used.
The center of the main
display will show the
total distance that the
walking belt has moved.
The right side of the
main display will show
an E for English miles or
an M for metric kilome-
ters. Press the SPEED +
button to change the unit
of measurement if desired.
IMPORTANT: Make sure there is not a letter D
in the main display. If a D appears, the console is
in the “demo” mode. This mode is intended to be
used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power
cord can be plugged in, the key can be removed
from the console, and the displays and indicators
on the console will automatically light in a preset
sequence, although the buttons on the console will
not operate. If a D appears in the display when
the information mode is selected, press the
SPEED – button so the display is blank.
1
5
4
3
2
1
Jack