Epic Fitness FMTL39940 Treadmill User Manual


 
20
Note: The SPEED and INCLINE buttons will not
function while the fitness test program is selected. If
your pulse is not detected during the program, the
letters PLS will flash in the main display. If your
pulse is not detected at the end of any four-minute
level, the fitness test program will end and the
main display will show a fitness level of 00.
The fitness test program cannot be stopped tem-
porarily and then restarted. However, the program
can be stopped at any time with the STOP button.
The main display will then show an estimated fit-
ness level.
When the program is completed, remove the
key.
See step 6 on page 17.
HOW TO CONNECT THE TREADMILL TO YOUR
CD PLAYER, VCR, OR COMPUTER
To use iFIT.com CDs, the treadmill must be connected
to your portable CD player, portable stereo, home
stereo, or computer with CD player. See pages 20 to
22 for connecting instructions. To use iFIT.com
videocassettes, the treadmill must be connected to
your VCR. See page 22 for connecting instructions. To
use iFIT.com programs directly from our Web site,
the treadmill must be connected to your home com-
puter. See page 22 for connecting instructions.
HOW TO CONNECT YOUR PORTABLE CD PLAYER
A. Plug one end of the audio cable into the indicated
jack on the left side of the console. Plug the other
end of the cable into the PHONES jack or LINE
OUT jack on your CD player. Plug your headphones
into the other jack on the console.
6
LINE OUT
PHONES
LINE OUT
PHONES
Audio
Cable
Headphones
A