Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
29
AJ0975
Filling Air Line Lubricator
IMPORTANT: To avoid o-ring leaks at the top of
the bowl, do not remove bowl. Fill through the oil
fill hole. Refer to item 2,
Figure 23.
When oil level falls below 1/4 full, refill the bowl to
3/4 full (oil level approximately 1/2 inch [12.7 mm]
from top) with SAE 10 weight non detergent oil (refer
to
).
IMPORTANT: Do not overfill bowl. Damage to
filter, regulator, valves and cylinders will result and
void warranty.
Figure 23
To avoid possible serious injury, ALWAYS
close air supply line shut-off valve AND
lock out air service BEFORE filling oil
bowl.
W383
WARNING
SCR103N
1 Oil Flow Rate Adjusting Screw 3 Air Line Lubricator
2 Oil Fill Hole
1631605B
1
3
2
TOP VIEW
SIDE VIEW