Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
15
AJ0975
6. Grasp one sleeve with gusset facing you. Overlap
gusset of cuff as if you are going to button cuff so
that air does not escape gusset. The sleeve end is
now closed (do not button). Refer to
Figure 9.
Figure 9
7. Turn cuff so gusset is facing away from you.
Slide closed sleeve upward in the sleeve extender
just above cuff seam. Sleeve should not be
twisted between shoulder and cuff. Pleat closest
to gusset should ride top edge of sleeve. Repeat
with other sleeve. Refer to
NOTE:.
NOTE: Dress sleeve into clamp at CUFF SEAM.
Do NOT place cuff in clamp. Loading cuff into
clamp will pinch or crease the cuff. A guide on each
clamp will cause you to meet resistance if cuff is
accidentally loaded. Refer to
Figure 11.
Figure 11
NOTE: Do NOT leave gap between cuff and clamp
when loading sleeve. The area of the sleeve below
clamp will NOT finish properly. Refer to
Figure 12.
Figure 12
NOTE: Do NOT clamp short sleeve shirts. Instead,
turn STEAM Timer Selector switch to the OFF
position when pressing short sleeve shirts. Return
STEAM Timer Selector switch to the ON position
for long sleeves.
CAB421N
CAB422N
Figure 10
CAB478N
CAB479N
1 Cuff
2 Sleeve
1
2
2
1