Filter
Top Products
Part II
54
2. In-Zone-Goal Countdown Timer Alarm
You can set a goal time for being in your Target Zone. This In-Zone-Goal
Countdown Timer is set while in the Recall Data Mode or the Program
Mode. It can be set from 5 to 60 minutes. This value is set by pressing
STR/LAP Buttons
B
or STP/RESET Buttons
C
. If it is set to ON, the
"
" icon is displayed in the Chrono Mode as the following figure:
The " " represents time segments. Each blinking segment means 1/9
of your goal time has been reached. When the total goal time is reached, the
watch will give four beeps and the display will flash your goal time for 10
seconds. (You can view the In-Zone-Goal Count Down Timer display in the
Recall Data Mode).
3. Drink Interval Timer Alarm
The watch will remind you to drink during exercise by giving a long beep and
flash with the amount of fluid loss for 10 seconds. Note: You must set the
Drink Interval Timer to ON and have the stopwatch running. (You can set
the Drink Interval Timer under the Fluid Check
TM
Mode refer to page 36.)
LAP
In-Zone-Goal Count
Down Timer Segments
OR
- When the stopwatch is stopped and has already reset to zero, press & hold
STP/RESET Button
C
to activate/deactivate the Target Zone Alarm.