Filter
Top Products
Number of Cycle (blinking)
- Press STR/LAP Button
B
or STP/RESET
Button
C
to adjust the value (range, 1~9 and C
for continuously ).
- Press MODE/NXT Button
D
to proceed to the
next item.
Time for Timer1 (blinking)
- Press STR/LAP Button
B
or STP/RESET
Button
C
to adjust the value (range, 5 - 59
seconds or 60 minutes).
- Press MODE/NXT Button
D
to proceed to the
next item.
Time for Timer2 (blinking)
- Press STR/LAP Button
B
or STP/RESET
Button
C
to adjust the value (range, 5 - 59
seconds or 60 minutes). If the interval timer is set
less 1 minute, the "sec" on the display will flash
for 1 second for indication.
- Press MODE/NXT Button
D
to exit and return
to the Interval Timer Mode.
LAP
LAP
LAP
Step 2
Step 3
Step 4
48
From the Interval Timer Mode, press MODE/NXT Button
D
three times to
return to the Analog Time Display.
Part II
B
D
C
B
D
C
B
D
C