Part I
17
4. Moisten the transmitter electrodes by applying a small drop of water on
each of the two contact areas. (Fig. 3)
Using your watch
The watch does not have to be worn on your wrist to register your heart
rate, but it must be within 3 feet of your transmitter belt.
You must be in the Chrono Mode to view the heart rate information. Press
MODE/NXT Button
D
four times to enter Chrono Mode.
Note:
If the watch receives no heart rate signal for 15 seconds, Heart Rate Mode
will automatically turn off. To reactivate the Heart Rate Mode, press and
hold SET button
A
while in the Chrono Mode.
The Hydra-Alert
TM
with advanced Fluid Check
TM
feature, for best estimate
your Fluid Loss and calories, please do MET Calibration before exercise.
(refer to Page 37 )
Fig. 3