Communication Information
96
5
C Press the 0
00
0 or 1
11
1 key until the file
you want to print is shown. Then
press [
Check
].
D Depending on the setting you
want to check or change, use one
of the following procedures.
Checking Destinations
(Destination List)
A Enter the “Destination List”
function number with the
number keys.
The total number of destina-
tions and the fax number or
each destination's name is
shown.
Note
❒ To see hidden destinations,
press [↑
↑↑
↑
Prev.
] or [↓
↓↓
↓
Next
].
Changing the Transmission Time
A Enter the “Change Start Time”
function number with the
number keys.
B Enter the transmission time (4
digits) with the number keys.
Use 24-hour or 12-hour format
depending on your area. For 12-
hour format, press [AM ↔ PM]
to switch between AM and PM.
Note
❒ You can not specify a start
time more than 24 hours into
the future.
❒ To start transmission imme-
diately, press [
Immediate
]. If
memory contains other files
queued for transmission,
those files are sent first.
Re-sending a File
If you select the failed transmis-
sion file, you can resend it. This
feature allows you to transmit a fax
message again. You can choose to
have files that were not transmit-
ted successfully stored in memory.
These files will be kept for either
up to 24 or 72 hours depending on
how you program this feature. ⇒
P.184 “Changing the User Parame-
ters”
