Advanced Transmission Features
88
4
C Enter the “Transfer Request”
function number with the num-
ber keys.
Note
❒ If the appropriate display is not
shown, press
[
↑
↑↑
↑
Prev.
]
or
[
↓
↓↓
↓
Next
]
.
D Enter a Transfer Stations and
press
[
Recv. Stn
]
.
Note
❒ Enter the fax numbers of the
Transfer Stations with either
Quick Dials, Speed Dials or the
number keys.
❒ If you make a mistake, press the
{
Clear/Stop
} key and try again.
❒ To cancel the Transfer Request,
press
[
Cancel
]
. The Transmis-
sion Mode menu is shown
again.
E Enter one or more End Receivers.
Note
❒ You cannot enter the numbers
of the End Receivers directly.
The numbers must be stored in
Quick Dials, Speed Dials or
Groups in the Transfer Sta-
tion(s). To specify an End Re-
ceiver, use the special format
described in ⇒ P.89 “Specifying
an End Receiver”.
❒ Press
[
Add RcvStn
]
if you wish
enter more End Receivers.
❒ Press 0 or 1 to see the End Re-
ceivers already entered. You
can select an End Receiver from
this list and cancel it by pressing
the {
Clear/Stop
} key.
❒ To cancel the Transfer Request,
press
[
Cancel
]
.
F When you have specified all the
End Receivers, press
[
OK
]
.
G If you want to enter an additional
Transfer Station, press
[
Yes
]
and
repeat steps 4 to 6.
If you press
[
No
]
, the Transmission
Mode menu is shown and a check
mark is added to Transfer Request.
H Press
[
Exit
]
.
