54
FUNCTION SETUP
EN
Deactivate all the network connection and settings.
1 Follow steps 1 to 4 in “Connection Test” on page 51.
2 Use [K / L] to select “Disable”, then press [ENTER].
3 Press [RETURN] to go back to the previous screen, or
press [SETUP] to exit.
You can confirm the current software version.
1 Follow steps 1 to 3 in “Connection Test” on page 51.
2 Use [K / L] to select “Software Update”, then press
[ENTER].
3 Use [K / L] to select “Current Version”, then press
[ENTER].
4 Press [ENTER] or [RETURN] to exit.
You can update the software by using a disc.
1 Follow steps 1 to 3 in “Connection Test” on page 51.
2 Use [K / L] to select “Software Update”, then press
[ENTER].
3 Use [K / L] to select “Disc Update”, then press
[ENTER].
4 Use [K / L] to select “Yes”, then press [ENTER].
5 Disc tray will open automatically.
• Insert the disc for software update and then press
[OPEN/CLOSE A].
6 After completing loading disc, confirmation
message will appear. Select “Yes” and press [ENTER]
to start upgrading.
• It may take a while to complete the upgrading.
(Please wait until “100%” appears on the front panel
display.)
7 After the disc update finishes, this unit will restart
and eject the disc.
You can update the software by connecting the unit to the
Internet.
1 Follow steps 1 to 3 in “Connection Test” on page 51.
2 Use [K / L] to select “Software Update”, then press
[ENTER].
3 Use [K / L] to select “Network Update”, then press
[ENTER].
4 Use [K / L] to select “Yes”, then press [ENTER].
•This unit will then start checking for the latest
firmware version.
5 Confirmation message will appear.
Use [K / L] to select “Yes”, then press [ENTER].
•The unit will star t downloading the latest firmware
version.
6 When the download completes, confirmation
message will appear. Press [ENTER].
•The unit will star t upgrading the firmware version.
• It may take a while to complete the upgrading.
(Please wait until “100%” appears on the front panel
display.)
7 After upgrading finishes, this unit will restart and
open the disc tray automatically.
Disable
Note
•The network connection can be reactivated by
setting the network connection to “Enable(Easy)” or
“Enable(C ustom)”.
Software Update
Current Version
Note
• Please visit www.onkyo.com to download the latest
firmware version.
Disc Update
x.xxx
www.onkyo.com
Others
Current Version
Current Version
If you wish to check latest update
or other product information,
please check our Website.
Note
• Please do not unplug the AC power cord while
executing the “Disc Update”.
• All settings will remain the same even if you update
the firmware version.
Network Update
Note
• Please do not unplug the AC power cord or LAN cable
while executing the “Network Update”.
• All settings will remain the same even if you update
the software version.
•The disc tray will open automatically after updating
finishes. This is not a malfunction.
