Centering – Imager Only 243
E-EQ-MX6RG-E-ARC MX6 Reference Guide
AimTime
Duration of the laser scanner or imager aim beam in 0.1 second increments.
Default: 0
Valid: 0 – 50 (0 – 5 seconds).
If a value greater than 50 is entered, the aim duration will be set to the maximum time of 5
seconds.
Centering – Imager Only
The centering feature is used to allow the user to accurately scan a selected barcode among a
group of barcodes that are located closely together. When centering is turned on, the imager will
only decode barcodes that intersect the centering window defined by the user. The centering
window must intersect the center of the barcode.
The default centering settings define a 60 pixel square area in the center of the imager's field of
view.
Default centering settings and allowable minimum and maximum settings are listed below.
CenteringEnable
Default: 0
Valid: 1 Enable
0 Disable
Enable or disable Centering feature. When disabled, the following values are ignored.
Position Default Minimum Maximum
CenteringTop
210 0 239
CenteringBottom
270 240 479
CenteringLeft
290 0 319
CenteringRight
350 320 639
