XP20 User Manual
4-2
Janam Technologies LLC
Calibrate the screen
The first time you start the Janam XP20 handheld computer, setup instructions appear onscreen. These
instructions include a calibration screen, or digitizer. Calibration aligns the internal circuitry of the
handheld computer with its touch-sensitive screen so your handheld
computer can detect the task you want to perform when you tap an
element on the screen.
To calibrate your screen:
1. Tap the applications icon > prefs.
2. Tap digitizer in the pick list on the upper right corner of the screen.
3. Follow the on-screen instructions, tapping the screen where
indicated.
Use the multi-language feature
WARNING: If the language you choose on your handheld computer does not match the language you
chose when you installed your Palm Desktop software, you may experience data loss. If you are unsure,
reinstall the software.
WARNING: If you change to a language other than English, you will have to perform a hard reset, which
will erase all data on your handheld computer. If you have data you need to save, perform a HotSync
operation before you change languages.
If your handheld computer has the multi-language feature, the available languages will be displayed in the
digitizer screen.
Once you have calibrated the digitizer, you will be prompted to pick a language. Follow these steps:
1. Tap your language choice > OK.
A confirmation screen reminds you that this setting must match the
language setting on your Palm Desktop software.
2. Perform a hard reset of your device IF you select yes to change to a language other than English.
NOTE: You will see similar information when you select digitizer in the preferences menu, or launch the
welcome application.
