Correcting Manually
You can manually correct keystone distortion.
You can use H/V-Keystone to correct the projected image under the
following conditions.
Correction angle for EB-536Wi: approx. 5˚ right and left/approx. 7˚ up and
down
Correction angle for EB-535W/EB-525W/EB-530/EB-520: approx. 15˚ right
and left/approx. 15˚ up and down
H/V-Keystone
Manually correct distortion in the horizontal and vertical directions
independently.
a
Press the [w] or [v] button on the control panel during
projection to display the Keystone screen.
b
Press the following buttons to correct keystone distortion.
Press the [
w] or [v] button to correct vertical distortion.
Press the [Wide] or [Tele] buttons to correct horizontal distortion.
a
You can also set H/V-Keystone from the Configuration menu.
s Settings - Keystone - H/V-Keystone p.119
Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately.
Adjusting Projected Images
49
