Filter
Top Products
14
29. Wrap the Press Cable (58) around a “V”-Pulley
(6). Attach the “V”-Pulley and a Long Cable Trap
(50) inside of the bracket on the Seat Frame (36)
with a 3/8” x 2 1/2” Bolt (7) and a 3/8” Nylon
Locknut (21). Make sure that the Cable Trap is
turned to hold the Cable in place.
30. Wrap the Press Cable (58) up around a 3 1/2”
Pulley (15). Attach the Pulley and a Cable Trap
(66) to the Rocker Arm (32) with a 3/8” x 3 1/2”
Bolt (16), a 3/8” Washer (9), and a 3/8” Nylon
Locknut (21). Make sure that the Cable Trap is
turned to hold the Cable in place.
31. Route the Press Cable (58) through the Press
Frame (17) and wrap the Cable around a
3 1/2” Pulley (15). Attach the Pulley inside of the
bracket on the Front Upright (42) with a 3/8” x 2”
Bolt (12) and a 3/8” Nylon Locknut (21).
32. Wrap the Press Cable (58) around a 3 1/2” Pulley
(15). Attach the Pulley and a Cable Trap (66) to
the Press Frame (17) with a 3/8” x 3 1/2” Bolt
(16), a 3/8” Washer (9), and a 3/8” Nylon Locknut
(21). Make sure that the Cable Trap is turned
to hold the Cable in place.
29
30
31
16
9
21
12
15
58
17
42
17
16
15
66
21
9
32
15
58
7
58
6
50
66
21
36
21
32