Filter
Top Products
15
32. Press four 3/4” Round Inner Caps (54) into the
ends of the two Pad Tubes (17).
Insert one Pad Tube (17) into the Seat Frame
(15). Slide a 5 1/2” Pad (18) onto each end of the
Pad Tube.
Insert the other Pad Tube (17) into the Leg Lever
(16). Slide a 5 1/2” Pad (18) onto each end of the
Pad Tube.
33. Attach the top of the Punching Bag (30) to the
3/8” x 2” Eyebolt (64) in the Punching Bag Arm
(6) with a Cable Clip (38). Attach the bottom of
the Punching Bag to the hole in the Stabilizer (1)
with the Bungee Cord (29).
18
16
54
54
6
64
38
30
29
1
Hole
17
15
18
32
33