Filter
Top Products
14
28. Attach the Backrest (21) to the Front Upright (4)
with two 1/4” x 2 1/2” Screws (72) and two 1/4”
Washers (81).
29. Press a 1 1/2” Square Inner Cap (57) into the
Seat Frame (15).
Insert the 1/4” x 2” Carriage Bolt (68) into the
center hole in the Seat Plate (19). Attach the Seat
Plate to the Seat (20) with two 1/4” x 3/4” Screws
(67).
Insert the 1/4” x 2” Carriage Bolt (68) into the indi-
cated hole in the Seat Frame (15). Tighten a 1/4”
Nylon Locknut (82) with a 1/4” Washer (81) onto
the Carriage Bolt.
Attach the other end of the Seat (20) to the Seat
Frame (15) with a 1/4” Washer (81) and the 1/4” x
2” Screw (76).
30. Press a 1 1/2” Square Inner Cap (57) into the Leg
Lever (16).
Lubricate the 5/16” x 2 1/4” Bolt (77). Attach the
Leg Lever (16) to the Seat Frame (15) with the
Bolt and a 5/16” Nylon Locknut (83). Do not
overtighten the Nylon Locknut; the Leg Lever
must be able to pivot freely.
Insert a 3/8” x 2” Eyebolt (64) into the Leg Lever
(16) from the direction shown. Tighten a 3/8”
Nylon Locknut (84) and a 3/8” Washer (86) onto
the Eyebolt.
31. Rest the Seat Frame (15) on the indicated pin in
the Front Upright (4). Attach the Seat Frame to
the Front Upright with a 5/16” x 2 3/4” Carriage
Bolt (66) and the Seat Knob (60).
Seat Assembly
28
29
57
15
81
82
76
20
68
19
67
21
4
81
81
72
72
57
84
16
86
15
83
77
Lubricate
64
30
66
15
60
4
Pin
31