Filter
Top Products
6
2. Refer to drawing 2a. Press a 25mm Round Inner
Cap (49) into each end of the weight tube on the
Weight Carriage (19). Note: Make sure the
Square Slider Bushings (70) are assembled to
the Weight Carriage and Weight Stop (67).
Turn the Weight Stop (67) so that the indicated
hole is on the side shown and the Square Slider
Bushing (70) is on top. Slide the Weight Stop
onto the Rear Upright (56).
Refer to drawing 2b. Attach the Weight Stop
(67) to the Rear Upright (56) with an M8 x 70mm
Bolt (11) and an M8 Nylon Locknut (3).
Orient the Weight Carriage (19) as shown. Slide
the Weight Carriage onto the Rear Upright (56).
Press a 25mm Square Inner Cap (65) into the
Front Upright (42). Slide the Front Upright onto
the M8 x 63mm Carriage Bolts (1) in the Base
(4). Hand tighten an M8 Nylon Locknut (3) onto
each Carriage Bolt. Do not tighten the Nylon
Locknuts yet.
3. Press a 50mm Square Inner Cap (27) into the top
of the Rear Upright (56). Press a 45mm Square
Inner Cap (44) into each end of the crossbar on
the Top Frame (55). Press two 25mm Round
Inner Caps (49) into the top of the crossbar.
Attach the Top Frame (55) to the Front Upright
(42) with two M8 x 67mm Bolts (61), a Support
Plate (8), and two M8 Nylon Locknuts (3). Attach
the Top Frame to the Rear Upright (56) in the
same manner.
Tighten the Nylon Locknuts used in steps 1–3.
4. Press a 25mm Plastic Bushing (26) onto each
welded spacer on the Press Frame (17). Slide the
Press Frame onto the Base (4) so the Plastic
Bushings are aligned with the indicated tube in
the base. Note: This will be a tight fit; the
Plastic Bushings should fit over the ends of
the tube in the Base.
Lubricate an M10 x 198mm Bolt (59). Attach the
Press Frame (17) to the Base (4) with the Bolt, two
M10 Washers (9), and an M10 Nylon Locknut (21).
Note: Do not overtighten the Nylon Locknut;
the Press Frame must be able to pivot easily.
2
42
67
70
19
56
Hole
65
3
1
4
70
70
67
19
49
49
70
4
4
Tube
Welded
Spacers
17
Lubricate
21
9
26
9
59
2a
2b
3
19
11
67
56
ARM ASSEMBLY
3
61
61
8
44
44
49
27
55
56
42
3
Crossbar
3
8