Filter
Top Products
13
24. Press a 38mm Square Inner Cap (32) into the
Seat Frame (36).
Insert the M6 x 50mm Carriage Bolt (38) into the
center hole in the Seat Plate (37). Attach the Seat
Plate to the Seat (13) with two M6 x 16mm
Screws (18).
Insert the M6 x 50mm Carriage Bolt (38) into the
indicated hole in the Seat Frame (36). Tighten an
M6 Nylon Locknut (2) with an M6 Washer (10)
onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Seat
Frame (36) with an M6 Washer (10) and the M6 x
50mm Screw (24).
25. Press a 38mm Square Inner Cap (32) into the
Leg Lever (29).
Lubricate the M8 x 57mm Bolt (33). Attach the
Leg Lever (29) to the Seat Frame (36) with the
Bolt and an M8 Nylon Locknut (3). Do not over-
tighten the Nylon Locknut; the Leg Lever
must pivot freely.
Insert the M10 x 63mm Eyebolt (35) into the Leg
Lever (29) from the direction shown. Tighten an
M10 Nylon Locknut (21) with an M10 Washer (9)
onto the Eyebolt. Note: Be sure the Eyebolt is
positioned vertically on the Leg Lever.
26. Rest the Seat Frame (36) on the indicated pin in
the Front Upright (42). Attach the Seat Frame to
the Front Upright with an M8 x 67mm Carriage
Bolt (14) and the Seat Knob (40).
24
25
10
2
24
36
36
3
Lubricate
29
9
21
32
35
33
13
38
37
32
18
26
36
40
Pin
42
14