Filter
Top Products
1. Before assembling this product, make sure you
understand the information in the box above.
Press a 2Ó Square Inner Cap (17) into the top end of
one Upright (1).
Press a 2Ó Square Inner Cap (17) into each end of
the Right Stabilizer (26).
Insert three M10 x 62mm Carriage Bolts (33) through
the holes in the Right Stabilizer (26). Note: On one
side of the Stabilizer there is an indentation
around the holes. Insert the Bolts from this side.
Place the Stabilizer flat on the floor.
Place the Upright (1) over the three M10 x 62mm
Carriage Bolts (33) in the Right Stabilizer (26).
Secure the Upright with three M10 Nylon Locknuts
(11). Do not tighten the Nylon Locknuts yet. Note:
Set the Upright aside and make sure it cannot fall
over.
1
6
Before beginning assembly, carefully read the
following information and instructions:
¥ Assembly requires two people.
¥ Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
¥ Tighten all parts as you assemble them, unless
instructed to do otherwise.
¥ For help identifying the small parts, use the PART
IDENTIFICATION CHART on page 5.
¥ As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
The following tools (not included) are required
for assembly:
¥ Two (2) adjustable wrenches
¥ One (1) rubber mallet
¥ One (1) standard screwdriver
¥ One (1) phillips screwdriver
¥ Lubricant, such as grease or petroleum jelly
plus soapy water.
Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end wrenches or a set of ratchet wrenches.
Assembly
Make Things Easier for Yourself!
Everything in this manual is designed to ensure
that the assembly of our products can be complet-
ed successfully by anyone. However, it is impor-
tant to recognize that your new equipment is a
sophisticated product with many small parts and
consequently, the assembly process will take
time. Most people find that by setting aside plenty
of time, and by deciding to make the task enjoy-
able, assembly will go smoothly.
33
1
11
11
17
33
26
17
17