Filter
Top Products
11
17. Insert the Lat Tower (9) into the Front Leg (19). The
Lat Tower must be turned as shown. Secure the
Lat Tower with the Adjustment Knob (36).
17
9
19
36
16. Slide the Weight Carriage (47) onto the Lat Tower (9).
Make sure the Weight Carriage is oriented as
shown.
Slide the closed loop on the Cable (45) onto the M10
x 19mm Bolt (46) in the bracket on the Weight
Carriage (47). Secure the Cable with an M10 Nylon
Locknut (11).
Slide a Weight Stop (53) onto each end of the weight
tube on the Weight Carriage (47).
16
47
53
46
53
11
45
9