Filter
Top Products
36
X6150
X6150
ENGINEERING MODE
Use the User Set option in Engineering Mode to adjust the Default Weight
and Default Level for you console.
ENTERING ENGINEERING MODE
• Press and hold the UP
▲
and DOWN
▼
RESISTANCE ARROW
keys simultaneously for three seconds.
• The console will beep and bring you into engineering mode. Use
the UP
▲
and DOWN
▼
RESISTANCE ARROW keys to scroll
through the various engineering options.
• Press the ENTER key to select the appropriate engineering option.
• Use the UP
▲
and DOWN
▼
RESISTANCE ARROW keys within
each setting to modify the setting
• Press the ENTER key to save the setting.
• To exit the engineering option you are in press and hold the START
key for three seconds.
• To exit engineering mode, press and hold the START key for three
seconds.
ENGINEERING OPTIONS INCLUDE:
DISP TEST
USER SET
ACC TIME
ACC DIST
HW TEST
INCL CAL
INCL SET
SETTING
LCD TEST
SET DEFAULT LEVEL AND DEFAULT TIME
DISPLAY ACCUMULATED TIME
DISPLAY ACCUMULATED DISTANCE
TEST USED BY SERVICE TECHNICIANS TO TEST ECB SYSTEM
AUTO-CALIBRATION OF ELEVATION MOTOR TO SET MIN, MAX AND ZERO
VIEW AND/OR ADJUST INCLINE ADC ZERO, MIN AND MAX VALUES (SET AFTER AUTO-
CALIBRATION)
DESCRIPTION