Filter
Top Products
GB
OWNER’S MANUAL
•
T80 T85
7
speed change faster. Track speed ranges from 0,5-20
km/h / 0,3-12,5 mph (T80) / 0,5-22 km/h / 0,3-14
mph (T85).
ELEVATION CONTROL KEYS
Click the elevation up key to increase elevation in 0,5
% increments, and the elevation down key to decrease it
in 0,5 % increments. Pressing these keys longer makes
the speed change faster. Track elevation ranges from 0 %
(horizontal) to 10 %.
ARROW KEYS
In user settings, you can adjust the values with the arrow
keys. In HRC mode, you can set and scale the target
HR with the arrow keys. In exercise profiles, you can set
and scale the effort level with the arrow keys. Pressing
the “arrow up” key will increase the effort, and pressing
the “arrow down” key will decrease the effort.
STOP / PAUSE / RESET
Press STOP once and the treadmill stops and moves
into its waiting state for 5 minutes. You can restart the
interrupted exercise by pressing the START key within
5 minutes. Press STOP twice to end your exercise. Keep
the STOP key pressed down for 2 seconds to reset the
console. The console then switches to its initial state.
SELECT
Before you press the START key, SELECT key selects
the training modes. During training, SELECT key
selects the profile displays.
ENTER
Confirm your selections (training mode or program,
user set-ups)
MEMORY
You can use the MEM key to save your completed
exercise in the console’s memory. To save your data, you
need to choose a user code. A total of 5 workouts can be
saved under each user code.
PSC
Position Speed Control (PSC) allows you to adjust the
track speed without touching the console by changing
your position on the track during exercise. The PSC
function requires the use of a heart rate monitor. PSC
can be used in manual exercises, HRC exercises with
elevation adjustment, the Rolling Hills profile, as well as
both fitness tests.
SET
Press the SET key to choose a user code, enter user
details, select display values, and to display the total
training distance in kilometres and the total training
time in hours.
DISPLAYS
HEART RATE
45-220 bpm. The heart rate light always blinks when
the console is receiving a heart rate signal.
KCAL (estimated energy consumption)
0-9999 kcal, 1 kcal increment
ELEVATION
0-10 %, 0,5 % increment
TIME
Exercise duration at 1 second intervals 00:00-99:59, and
at 1 minute intervals thereafter h1:40-h9:59
DISTANCE
0.00-99.99 km, 0,01 km increment
SPEED
Running deck speed (0,5-20 km/h / 0,3-12,5 mph
(T80) / 0,5-22 km/h / 0,3-14 mph (T85)), 0,1 km /
mph increment. A signal light indicates the selected
measurement unit (km/h, mph, pace = minutes/
kilometre).
GRAPHIC / TEXT DISPLAY
T80 features a combined text and profile display that
provides instructions in English when you switch to an
exercise and during the exercise itself. T85 is equipped
with a separate graphic display for detailed information
on your workout profile, while the text field provides
instructions both when you switch to an exercise and
during the exercise itself.
ENTERING USER DETAILS
We recommend that you choose a user code and save
your personal details: these details are needed e.g. for a
more accurate estimation of your energy consumption.
At the same time, you can set the units to be displayed
and check the total training values. Choosing a user
code will also allow you to save your exercise data.
1. Press SET. Use the arrow keys to select a user code (1-
4). Press ENTER to confirm your selection. NOTE! The
NO USER option displays device settings, showing e.g.
the total training time and distance.
2. Set the measurement units (Metric = metric system,
Imperial = avoirdupois). Use the arrow keys to change
the setting, and press ENTER to confirm your selection.
You will then move to the next setting.
3. Set the user weight. Use the arrow keys to change the
setting, and press ENTER to confirm your selection.
This information is needed for estimating energy
consumption. You will then move to the next setting.
4. Set gender (male, female). Use the arrow keys to
change the setting, and press ENTER to confirm your
selection. This information is needed for estimating
energy consumption. You will then move to the next
setting.
5. Set the age of the user. Use the arrow keys to change
the setting, and press ENTER to confirm your selection.
This information is needed for estimating energy
consumption. You will then move to the next setting.
6. Set the audio signal (ON = signals on, OFF = signals
off). Use the arrow keys to change the setting, and
press ENTER to confirm your selection. You will then
move to the next setting. NOTE! In profile workouts, the
console gives an audio signal in advance of any changes
in profile.
7. Set the units to be displayed (km/h, min/km, mph,
min/mile). Use the arrow keys to change the setting,
and press ENTER to confirm your selection. You will
T80_T85_manual.indd 7T80_T85_manual.indd 7 28.2.2006 17:38:3128.2.2006 17:38:31