Filter
Top Products
TOPCOM TWINTALKER 3000 9
TOPCOM TWINTALKER 3000
9
TOPCOM HB 4M00 9
ENGLISH
8 CHRONOGRAPH MODE
In normal time mode:
• S2: To go to chronograph mode
• S3: Start/stop chrono.
• S4: To save the time when
chrono is running (Lap time).
The chrono display is frozen, it
will resume back after 10s.
• [S4] Reset the chrono (Only
when chrono is stopped) and
erase all LAP times.
8.1 LAP MEMORY
You can review the lap record no matter chrono is running or not:
• [S2]: to enter the chrono lap records.
• S3 or S4: to scroll between the LAP times (1-10).
• [S2]: to return back to normal chrono mode.
9 COUNTDOWN MODE
To set the countdown time:
• 2 x S2: To toggle to countdown mode.
• [S2]: Hours will blink.
• S3 or S4: Adjust hour up or down.
• [S3] or [S4]: Adjust hour quickly.
• S2: Confirm. Minutes will blink.
The chronograph counts up to 99 hours, 59 minutes and 59
seconds.
running time
running time
running
running time
Chronograph Mode
All Zero (First Hour)
(hour)
(second)
time (minute)
(1/100 second)
The maximum counting down time is 23 hours, 59 and minutes 59
seconds. The initial setting of the timer is 1 minute.
During the last 5 seconds the watch will beep once per second, and
10 seconds when it reach zero.
When the timer is counted to zero, it will automatically reload the
preset value.
HB 4M00.book Page 9 Monday, April 21, 2008 9:24 AM