Filter
Top Products
The Watch will display the current heading and bearing and
the estimated distance from your current location to the
selected waypoint.
3. Begin moving. The Watch will display your current location
until your location aligns with your chosen waypoint.
The Watch calculates the distance between your current
position and the chosen waypoint as a straight line. Depending
on your heading and bearing, the distance may appear to
increase as you move towards your desired waypoint.
4. Press and hold STOP/RESET to deactivate the Track Back
feature once you reach your destination.
5. Repeat steps 1 through 4 to navigate to another stored
waypoint. This allows you to retrace your path through a
series of stored waypoints.
45
To erase a waypoint, press and hold STOP/RESET .
If you erase a waypoint, it will not re-order the other
waypoints. For instance, if you have labeled your waypoints
WAYPNT 1, 2, and 3 and you erase WAYPNT 2 you will
then have waypoints labeled WAYPNT 1 and 3.
TO OPERATE THE TRACK BACK FEATURE
You can activate the Track Back feature when you are ready to
navigate from a current position to one of your stored waypoints.
When activated, the Track Back feature takes over Waypoints
Mode. You cannot perform any other functions until you
deactivate Track Back.
1. Press
▲
(DISPLAY) to select the desired waypoint.
2. Press and hold START/SPLIT. You will see the message
HOLD TO BEGIN TRACK.
Recall a stored
waypoint
Deactivate Track
Back
Activate
Track Back
44