Filter
Top Products
3938
Setting an alarm
1. Press MODE until Alarm Mode appears.
2. Press and hold the
SET button until the word SET briefly appears
on the display, followed by a flashing value.
3. Set the first value by pressing +
(DISPLAY) or – (STOP/RESET).
4. Press
SELECT (SET/FORMAT) to move to the next
value to set.
5. Repeat steps 3 and 4 for all the values that need adjustment.
6. Press
DONE (MODE) to save your changes and complete the setting
process.
For Alarm Mode, you can set the following values:
➤ Alarm type (WEEKDAYS, WEEKENDS, ONCE, or DAILY).
A DAILY alarm will ring every day at the selected time, a
WEEKDAYS alarm will ring Monday through Friday at the
selected time, a WEEKENDS alarm will ring Saturday and
Sunday at the selected time, and a ONCE alarm will only ring
one time at the selected time and then automatically turn off.
➤ Alarm time (hours, minutes and AM/PM if the time is set to
12-hour format).
➤ Alarm status (OFF or ON). You can also press START/SPLIT to
switch the alarm status.
Note that if you change any alarm settings, you automatically turn
on the alarm.
When the Watch reaches a scheduled alarm, the alarm tone sounds
and the INDIGLO
®
night light flashes for a period of 20 seconds.
You can silence the alarm during this period by pressing any
button on the Watch, or, if you do not silence the alarm before the
alert finishes, a backup alarm will sound after five minutes.
Selecting an alarm
You can use the Watch to set and store up to five alarms labeled
ALM1 though ALM5
1. Press MODE until Alarm Mode appears.
2. Press
▲ (DISPLAY) or ▼ (STOP/RESET) to choose the alarm
you want to set (ALM1 through ALM5).
▲
alarm
Set alarm
▼
alarm
INDIGLO®
night-light
Turn alarm
ON or OFF
To Configure
Mode or hold for
time