49
5.1. LOGBOOK AND DIVE PROFILE
MEMORY [LOG]
This instrument has a sophisticated high capacity
Logbook and Profi le Memory. The data is recorded
to the profi le memory based on the sampling rate.
The sampling rate in Gauge mode is adjustable to 10,
20, 30 and 60 s, and in Free mode 1 s. Dives shorter
than the recording interval are not registered.
To enter the Logbook Memory Mode:
1. In the Memory Mode [MEM], press S to select
the Logbook Memory Mode (Fig. 5.2.). The LOG
text appears at the bottom of the display to indicate
the selected mode.
2. Wait two seconds until the Logbook Memory
Mode activates automatically. For each dive there
are four pages of logbook dive information.
3. Press S to switch the display between Logbook
display I, II, III and IV.
The data of the most recent dive is shown fi rst. The
END text is displayed after the oldest and most recent
dive. (Fig. 5.7.)
F
R
E
E
A
C
S
Fig. 5.2. Logbook Memory
Mode.
F
R
E
E
A
C
S
Fig. 5.3. Logbook, Page I.