Filter
Top Products
42
While the enable/disable status [On/OFF] is selected
(blinking) press + or - to change the status.
5. After setting the downtimer, press the M button to
save the settings and return to setting mode.
4.4. DIVE MODE SETTINGS [DIVE]
In this mode you can select the type of dive mode to
be used (Gauge or Free) or turn the dive modes OFF.
If the dive modes are turned OFF, the dive computer
functions are disabled, thus turning the D3 into a mere
water resistant sportswatch.
NOTE: If the DIVE Mode is disabled (set to OFF),
the instrument will not activate the selected diving
mode (Gauge, Free) when submerged. Turning the
dive modes OFF enables the use of stopwatch and
downtimer functions underwater.
4.4.1. SET GAUGE MODE
To set the Gauge Mode:
1. In the Setting Mode, press S four (4) times to select
the Dive Setting Mode (Fig. 4.10.).
2. Wait two seconds until the Dive Setting Mode
activates automatically. The enable/disable status
[On/OFF] starts to blink on the display and the se-
A
C
S
Fig. 4.10. Dive Setting Mode.
F
R
E
E
A
C
S
Fig. 4.11. Set Gauge/Free mode.
Enable/disable status blinks.