Filter
Top Products
15
selected option. The TIMER text blinks on the display
if the stopwatch is running.
The display is illuminated by holding down the M
button for more than two seconds.
To set the time and date, refer to chapter 4.1 ”Setting
Time, Date and Dual Time”.
When diving, the dive entry time and date is regis-
tered in the Logbook Memory. Remember always to
check before diving that the time and date are cor-
rectly set, especially when traveling to different time
zones.
2.4.2. STOPWATCH [TIMER UP]
The Stopwatch function is entered by pressing the S
button, when the time keeping display is shown. The
text TIMEr UP at the bottom and the mode indicator
(TIME) on the left side of the display indicate that
you have entered the Stopwatch [TIMEr UP] func-
tion (Fig.2.6.).
The stopwatch of the D3 lets you measure elapsed
time, split times and the times of two runners. The
range of the stopwatch is 9 hours, 59 minutes, 59.9
seconds (Fig. 2.7.). When the range is exceeded the
F
R
E
E
A
C
S
Fig. 2.6. The Stopwatch function
is indicated by the TIMEr UP
text and a mode indicator.
F
R
E
E
A
C
S
R
TIME
Fig. 2.7. The Stopwatch displays
hours, minutes and seconds.