Star Trac E-TCI Treadmill User Manual


 
TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Operating Instructions 44
The following keys are available in MAINTENANCE MODE:
Incline Keys: Displays the next and previous parameter, respectively. Keys will repeat if held.
Speed Keys: Adjust the value of the displayed parameter up and down, respectively, in increments of 1
unit or 0.01 unit, as appropriate for the parameter. These keys do not save the new value - see Start
Key and Key below.
Enter Key: Updates (saves) the value of the displayed parameter in Flash memory. Alternatively, the key
may be used (see above).
Number/Program Select Keys: Enter new data item values for numeric parameters.
Stop Key: Exits Maintenance Settings Mode and restarts the TreadClimber
®
greeting.
The items that you may display and change with the previous keys are:
Item Lowest
Value
Default
Value
Highest
Value
Meaning
MC1 V X.XX N/A N/A N/A Display’s primary processor software version and checksum.
LCB V X.XX N/A N/A N/A Display’s secondary processor software version and checksum.
SERIAL NO 0 0 65,535 TreadClimber serial number.
OPER 0 0 65,535 Total operating hours.
DISTANCE 0 0 65,535 Total TreadClimber miles (UNITS=English), or km (UNITS=Metric).
UNITS - ENGLISH - English = units of pounds, miles, hours, minutes, seconds, feet,
Metric = units of kilograms, kilometers, hours, minutes, seconds,
centimeters.
TIME 5 99 99 Maximum time in minutes allowed for program, including warm-up.
WEIGHT 1 155/70 500/226 Default (to user), typical weight in lb (UNITS=English), or kg
(UNITS=Metric).
LANGUAGE - English - Language in English, Dutch, French, German, Portuguese, Spanish,
Swedish, Italian or Katakana.
METS - OFF - ON=METS display enabled.
OFF=METS display disabled.
PAUSE 30 45 120 Pause duration during a program, in seconds, either 30, 45, 60, 90 or
120.
AUTO FAN
- OFF - Turns on the fan 1 minute into program.
TREADLE
- ON - ON=Elevation function enabled.
SENSE
OFF=Elevation function disabled.
AUTO STOP
- OFF - ON=Auto stop feature enabled.
OFF=Auto stop feature disabled.
CSAFE - OFF - ON=CSAFE communication enabled.
OFF=CSAFE communication disabled.
PVS - ATSC - PVS type, ATSC/NTSC OR PAL/SECAM.
LOCK OUT - OFF - ON=TreadClimber lock out enabled.
OFF=TreadClimber lock out disabled.