Filter
Top Products
TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Operating Instructions
39
Heart Rate Training Programs
The TreadClimber
®
offers two HR training programs.
NOTE: For best results, use a HR strap. Contact HR grips
may provide a less accurate reading and can lead to a
less effective workout, due to holding onto the
TreadClimber.
Constant Heart Rate Control
This program is designed to maintain your HR at a constant level by varying your walking speed over the course of the
workout. Note that your HR will vary above and below the target rate during the program.
When you select this program, the console will prompt you to enter the total time desired for the workout
(5 - 99 minutes), user weight and your target HR (70 - 200 bpm). When all parameters are entered,
the workout will begin and continue for the time entered.
Heart Rate Intervals
This program is designed to gradually elevate your heart rate to the upper end of your selected training range, then
gradually decrease your heart rate to the lower end of your training range by setting Incline Level to 5 and varying
speed. During the workout, this cycle will repeat several times, creating an interval training effect that is customized to
your desired training range.
When you select this program, the console will prompt you to enter the total time desired for the workout (5 - 99
minutes), user weight and your Lower and Upper Target HR (70 - 200 bpm). When all parameters are entered, the
workout will begin and continue for the time entered.
NOTE: during setup, there must be at least an 18 BPM difference between the lower and upper HR limits to ensure an
interval workout.