TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Assembly Instructions 30
25. Install the front alternator shroud (Fig. 27) and secure it
in place by installing the corresponding two Phillips
head screws at the circled locations.
Fig. 27
26. Wedge the neck grommet (Fig. 28) between the
alternator shroud and neck mast.
Fig. 28
27. With two or more people, have one person carefully
tilt
the assembled TreadClimber (Fig. 29) at an angle by
pushing up at the center of each handrail while the
second person installs the rear stabilizing feet.
Fig. 29