Star Trac E-TCI Treadmill User Manual


 
TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Operating Instructions 32
Operating Instructions
Operating the TreadClimber
®
is very easy. Simply step onto the treadles, securely attach the pull cord STOP to
an article of your clothing, press QUICK START, and begin walking. The belt will begin at 0.5 mph (0.8 km/h) and
the level will be on level 1
IMPORTANT: Before operating the unit, you must be familiar with the following equipment limitations and safety
features.
Maximum Weight: Your TreadClimber is designed for a maximum user weight of 350 lbs/159 kg. DO NOT
exceed the maximum user weight.
S
TOP
SWI
TCH
ON / OFF POWER BREAKER
Emergency Stop: In case of emergency, press the STOP on the Hot Bar or pull the Pull Cord Stop on the Hot
Bar.
Immobilizing the Running Belt: To power the unit, set the ON/OFF power breaker to the ON position. To turn
the unit off, set the ON/OFF power breaker to the OFF position. When the unit is turned off, movement of the
running belt is prevented.
Safety Lockout Feature: Allows you to lock out the TreadClimber. When locked, the display shows the message
"LOCKED, ENTER ID TO UNLOCK". The user must press "0", enter a 5-digit ID number (default=12345), then
press ENTER to unlock the unit. Unit will then operate as normal (NOTE: The unit will lock back up if it is idle for
30 seconds). Use the LOCK OUT option in MAINTENANCE SETTINGS to enable/disable the lock out feature;
use the LOCKOUT ID option to change the default ID (see Settings & Testing).