Filter
Top Products
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
parts@staminaproducts.com
6
ASSEMBLY INSTRUCTIONS
STEP 1
There is a "R" decal on one end of the FRONT STABILIZER(3), the one with wheels.
Attach the
FRONT STABILIZER(3) onto the MAIN FRAME(1) with the "R" decal end at right side and
secure with
BUTTON HEAD BOLTS(M8 x 20mm)(68), LOCK WASHERS(M8)(78), and
WASHERS(M8)(79).
STEP 2
Attach the REAR STABILIZER(2) onto the MAIN FRAME(1) with BUTTON HEAD BOLTS
(M8 x 20mm)(68), LOCK WASHERS(M8)(78), and WASHERS(M8)(79).
NOTE:
R
RIGHT
LEFT
You can adjust the LEVELING CAPS(51) on the REAR STABILIZER(2) to keep the Elliptical
stable.