Stamina Products 55-1777 Elliptical Trainer User Manual


 
COMPUTER INSTRUCTIONS
B. PRESET PROGRAMS (P2 to P7)
STEP 1: POWER ON
Pedaling or press any button.
STEP 2 : SELECT PROGRAM
Press "
/ " buttons until the desired program is displayed.
STEP 3: SET THE PROGRAM TIME OR DISTANCE, AND AGE
Press the ENTER button, the TIME function mode will appear with the display flashing "0:00". Use " / "
buttons to set the program time, from 5 minutes up to 99 minutes with 1 minute increments. Or, you can
keep TIME as "00:00" and press the ENTER button to enter the mode to set the DISTANCE. Use " / "
buttons to set the DISTANCE, from 1 mile up to 999 miles with 1 mile increments.
Press the ENTER button to enter the mode to set the AGE. Use "
/ " buttons to set the AGE, from 10 up
to 99 years old. Please note that although the computer is designed for children down to 10 years old, this
product is not designed for children.
NOTE:
STEP 4 : START TO WORKOUT
Now you are ready to begin exercising. The program will not start until you press the START/PAUSE button.
With the input of age, the computer will display a TARGET H.R. when running the program. The
TARGET H.R. is 85% of your Maximum Heart Rate, and your Maximum Heart Rate is (220 - AGE).
If your pulse is equal to or greater than the TARGET H.R. during workout, the value of HEART
RATE will keep flashing. Please note that this is a warning for you to slow down or lower the
Level of resistance.
C. BODY FAT PROGRAM (P8)
STEP 1: POWER ON
Pedaling or press any button.
STEP 2 : SELECT PROGRAM
Press "
/ " buttons until the PROGRAM 8 is displayed.
STEP 3: SELECT GENDER AND INPUT YOUR HEIGHT, WEIGHT, AND AGE
Press the ENTER button, the GENDER mode will appear with the display flashing "
". Use " / "
buttons to select. Press the ENTER button and use "
/ " buttons to set the values of your HEIGHT,
WEIGHT, and AGE. After you input your age and press the ENTER button, the "PROGRAM 8" display will
keep flashing.
STEP 4: CALCULATE YOUR BODY FAT
Press the the START/PAUSE button and hold the pulse sensors on the Handlebar with both hands. A few
seconds later, the computer will show the information for FAT%, BMR, BMI, BODY TYPE, and the suitable
program profile for you. Press the START/PAUSE button to start to workout. Now, you can see the TARGET
H.R. that computer sugested for you. Always try to keep your HEART RATE readout close to the TARGET
H.R. during workout.
NOTE: If you don't hold the pulse sensors on the Handlebar with both hands properly, the pulse sensors
won't be able to pick up the signals. The computer will display an error message "E3". Press the
the START/PAUSE button and hold the pulse sensors with both hands properly to calculate
again.
The values calculated or measured are for average people and they are for exercise
purposes. They are not for medical purposes.
1.
2.
17