Filter
Top Products
COMPUTER INSTRUCTIONS
OPERATION DESCRIPTIONS
To stop a running program, press the START / PAUSE button. In this mode, you can press the
START
/ PAUSE button again to continue to run the current program. Or, you can use " / " buttons to
select a new program.
When you complete a program, the computer will remind you with an audible alarm. You can press any
button to stop the audible alarm.
If you want to restart with a new program, press and hold the START / PAUSE button down for two
seconds to reset all of the function values to zero. Use " / " buttons to select a new program.
The computer will shut off automatically after 4 minutes of inactivity and all function values will be reset
to zero.
1.
2.
4.
3.
NOTE:
POWER SOURCE:
The computer can use the adapter or the batteries as a power source. To save battery power, use the EMR
ELLIPTICAL with the adapter plugged into an electrical outlet.
HOW TO INSTALL AND REPLACE BATTERIES:
Open the Battery Door on the back of the computer.
The computer operates with four C size batteries, four batteries included. Refer to the illustration to
install or replace the batteries. Please install the lower two batteries first, then install the others.
The batteries must be correctly positioned and make sure the battery springs properly contact the batteries.
1.
2.
3.
20
Do not mix new batteries with old batteries.
Use the same type of battery. Do not mix an alkaline battery with another type of battery.
Rechargeable batteries are not recommended.
1.
2.
3.