Filter
Top Products
7
ACQUIRING HEART RATE
ACQUIRING HEART RATE: FINGER TOUCH
Heart rate may be acquired from any operating
mode (not in any Setting Sequence).
1. With the watch attached to your wrist, TOUCH
& HOLD the HEART RATE SENSOR (anywhere
on the metal top plate of the watch) with your
index finger.
NOTE: If Heart Rate Sensors are accidentally touched, the watch will
automatically attempt to acquire heart rate. If no heart rate is detected,
watch will resume operating mode in approximately 10 seconds. This
will not interfere with any timing functions in progress.
NOTE: You may exit Heart Rate mode at any time by Pressing the
Mode, Start/Stop or Reset key.
2. Continue TOUCHING & HOLDING until heart rate displays.
3. Once Heart Rate is acquired, RELEASE THE SENSOR. Heart Rate will continue to display for a period of
approximately 5 seconds.
HEART RATE LOCK
To deactivate Finger Touch Heart Rate (when you don’t want to accidentally acquire heart rate):
1. In Time mode, PRESS & HOLD the LAP/VIEW key. The lock icon ( ) will appear in the upper left of the
display.
2. To unlock, PRESS & HOLD the LAP/VIEW key for 2 seconds in Time mode. The lock icon will disappear.
OR
SP5296IS01ROD.indd Sec1:7SP5296IS01ROD.indd Sec1:7 6/11/10 12:38 PM6/11/10 12:38 PM