Filter
Top Products
XG400 Elliptical
16
The Manual program works as the name implies, manually. This means that you
control the workload and not the computer. To start the Manual program, follow the
instructions below or just press the Manual button, then the Enter button and follow
the directions in the Message Center.
1. Press the Manual key, then press the Enter key.
2. The Message Center will ask you to enter your Age. You
may enter your age, using the Up and Down keys, then
press the Enter key to accept the new value and proceed
on to the next screen.
3. You are now asked to enter your Weight. You may adjust
the Weight value using the Up and Down keys, then press
Enter to continue.
4. Next is Time. You may adjust the Time and press Enter to
continue.
5. Now you are nished editing the settings and can begin
your workout by pressing the Start key. You can also go
back and modify your settings by pressing the Stop key.
NOTE: At any time during the editing of Data you can press
the Stop key to go back one level, or screen.
6. Once the program starts you will be at level one. This is the
easiest level and it is a good idea to stay at level one for a
while to warm up. If you want to increase the work load at
any time press the Up key; the Down key will
decrease the work-load.
7. During the Manual program you will be able to scroll through the data in the
Message Center by pressing the Enter key.
8. When the program ends you may press Start to begin the same program again
or Stop to exit the program or you can save the program you just completed as a
custom user program by pressing a User key and following the instructions in the
Message Center.
PROGRAMMABLE FEATURES
MANUAL