Filter
Top Products
Interval Timer (INT)
The interval timer is displayed on the
lower line of the screen when (INT)
appears on the left. The timer indicates
the end of an interval with one short
beep per second for the last 4 seconds
of the interval. This is followed by a
long beep, indicating the beginning
of a new interval.
Cadence (CAD)
Cadence mode will display your pedal-
ing speed in RPM’s (revolutions per
minute) on the lower line of the scre e n .
Monitoring how fast you turn your ped-
als can be used as a tool to enhance
the efficiency with which you ride your
bicycle. Simply put, the best cadence is
a balance between leg speed and pedal
p re s s u re. Beginning cyclists typically
p refer to pedal at a slower cadence,
a round 60-rpm, while advanced cyclists
and racers are more efficient between
90 and 100 rpm. (See figure 15)
Trip Distance (DST)
Trip distance mode will re c o rd up to
999.99 miles or kilometers and then ro l l
to zero. The trip distance function can
be reset by pressing the "FUNCTION"
button for three seconds. The resolution
17
shows whether the current speed is
above or below the average speed.
Maximum Speed (MAX)
The maximum speed is displayed on
the lower line of the screen when MAX
is shown on the left. The maximum
speed is retained in memory and
updated when a higher speed is
attained. The maximum speed can be
reset by pressing the "FUNCTION"
button for three seconds.(Seefigure 14)
Auto Start/Stop Timer (ATM)
In ATM mode the stopwatch function
re c o rds the actual time spent riding. It
operates only when there is speed
input and is displayed on the lower
line of the scre e n .
Timer Mode (TM)
In TM mode the stopwatch function will
operate when the "FUNCTION" button
is pressed. The stopwatch will record
the total time after the button is pressed
regardless of whether there is speed
input or not. The average speed (AVS)
will be calculated based on the time
the timer mode is activated.
16
FIGURE 15: CADENCE SCREEN
FIGURE 14: MAXIMUM SPEED SCREEN
01_SDZN_PRO_USA_1-24.qxd 1/24/01 12:09 PM Page 16