Filter
Top Products
4. Magnet with screw (1)
5. Cadence magnet (1)
6. Cable tie wraps (8)
7. Mounting bracket sizing straps (3)
8. Transmitter (1)
9. Transmitter mounting bracket (1)
MOUNTING
THE SPEEDZONE PRO
The SpeedZone Pro wireless transmitter
can mount on the right or the left side
of the fork blade. The right side should
be used on large frames or when a
suspension fork is installed. The optimal
distance between the computer and
the transmitter is 24 inches (610mm)
The distance may need to be less than
24 inches (610mm) if ambient temper-
atures are below 40°F (4°C). To reduce
signal loss in colder temperatures, the
transmitter should be mounted as close
to the computer as possible. (Maximum
mounting distance is 28 inches). Use
the transmitter-mounting bracket and
tie-wraps provided to position the
sensor. Do not tighten the tie-wraps
until final placement of the magnet is
correct. (See figure 1).
3
• GR% - Inclinometer
• TMP – Temperature
• ALT – Altimeter
• ALT∆– Altitude climbed
This computer also features:
• Second Wheel Option
• Easy Calibration Mode
• Wireless Mounting System
• Heavy-duty abrasion resistant
pick-up wire
• Water resistant housing
• 2 Year Warranty
• Backlit LCD display
What is included in your
SpeedZone Elite package:
1. SpeedZone computer (1)
2. Mounting bracket wired for cadence (1)
3. Mounting bracket w/out cadence wiring (1)
2
1
2
3
4
6
5
7
8
9
FIGURE 1:
S E N S O R
P L A C E M E N T
FIGURE 2:
M A G N E T
A T T A C H M E N T
01_SDZN_PRO_USA_1-24.qxd 1/24/01 12:09 PM Page 2