Specialized Cyclocomputer Cyclometer User Manual


 
mode has been selected, press the
"FUNCTION" button to advance to the
next operating mode.
6. Interval Timer
Your Speedzone Elite is equipped with
an Interval Timer. This feature allows
you to customize your training by inte-
grating a programmable repeating
countdown timer into your workout.
To enter the interval timer mode, pre s s
the "MODE" button until "INT" appears
on the left-hand side of the screen.
You are now in interval timer mode.
To set the interval timer, hold the
"FUNCTION" button for three seconds.
The hour digit will begin flashing. Press
the "MODE" Button until the desired
number appears. (Hold down the
"Mode" button to scroll quickly) Press
the "FUNCTION" button once to set
this number and advance to minutes.
Repeat this process until minutes and
seconds are set to the desired settings.
Press the "FUNCTION" button to exit
programming mode. Once the interval
timer is programmed, press the
" F U N CTION" button to start/stop the
countdown. (See figure 12)
Note: The shortest interval that can
be set is 5 seconds.
5. Timer Selection
The timer can be selected for either
Automatic Timer Mode (ATM) or Timer
Mode (TM). The ATM selection allows
you to keep track of your actual riding
time. The timer only operates when the
wheel is rotating and cannot be turned
on or off manually.
The TM selection is just like a conven-
t i o n a l stopwatch. The timer is activated
manually and records the time whether
the wheel is rotating or not. Tapping
the "FUNCTION" button starts and
stops the stopwatch and holding the
"FUNCTION" button for three seconds
will reset the stopwatch.
Note: The average speed (AVS) will
be calculated differently based upon
the selection of ATM or TM. If ATM
is selected, the AVS is based upon
only riding time. If TM is selected the
AVS is based on the total time the stop-
watch is turned on or activated.
(See figure 11)
To select either TM or ATM, first
press the "MODE" button until either
"TM" or "ATM" appears on the left-
hand side of the screen. To alternate
between "TM" and "ATM" press the
"MODE" and "FUNCTION" buttons
simultaneously. Once the desired timer
12
FIGURE 12: INTERVAL TIMER SCREEN
FIGURE 11: ATM/TM SCREEN
13
01_SDZN_PRO_USA_1-24.qxd 1/24/01 12:09 PM Page 12