Filter
Top Products
28 V 390 SEMI-RECUMBENT BIKE
GENERAL INFORMATION
THE SEAT ANGLE ADJUSTMENT
a. Adjust The Seal Angle:
1. Determine the seat angle that you prefer. On the Inner Seat Carriage Slider (3) there is a numbered scale from
1 to 5; from 9 to 45 degree (9 degree increment)
2. Loosen the Pull Pin (29) by turning it counter-clockwise
3. Use your one hand to pull the Pull
Pin (29) outward while use the
other hand to put your fingers into
the hand grip, located on the back
of the Rail Cover (54,55), to slide
the Inner Seat Carriage Slider (3)
upward or downward to the proper
seat angle. Release the pin when
the preferred angle is achieved.
4. Make sure the pin on the Pull Pin (29) locks into position then turn
the clockwise to tighten.
b. HORIZONTAL ADJUSTMENT OF THE SEAT:
1. After adjusting the seat angle, you
will need to adjust the seat pad
horizontally.
2. Behind the Seat Carriage Cover
(48, 49), there is a number scale
from 1 to 5. The number is designed to match the number of the Inner Seat
Carriage Slider (3)
3. To adjust the seat horizontally, pull the Locking Pin (47) outward and adjust the
Seat Cushion (42) upward or downward until the seat is horizontal. Release the Locking Pin (47) to lock the seat.
When the pin click in position the seat is locked.