Filter
Top Products
16 V 390 SEMI-RECUMBENT BIKE
ASSEMBLY
Step 1: Attach the Stabilizers, Leveler and Pedals
Note: the stabilizer is marked with an R to denote the right side.
Caution: Improperly rotating the pedal threads may cause damage to the equipment
A).Attach the front stabilizer to the main frame using 2x M8xp1.25x90mm Socket Head Bolts (115), 2 x M8 Lock
Washers (88) and 2 x 8x16x2.0t Washers (90). Slide the bolts through the front stabilizer and tread them in to the main
frame.
B). Attach the rear stabilizer to the main frame using 2x M8xp1.25x90mm Socket Head Bolts (115), 2 x M8 Lock
Washers (88) and 2 x 8x16x2.0t Washers (90). Slide the bolts through the rear stabilizer and tread them in to the main
frame.
C) Tilt the bike to the side and thread the leveler completely into the frame. You will adjust the leveler after assembly is
complete
D). Attach the right pedal into the right side crank. To tighten, turn the pedal treads clockwise.
E). Attach the left pedal to the left side crank. To tighten, turn the pedal threads counter clockwise
Be sure to thread the Leveler (147)
tightly into the Main Frame (1) before
moving to the next page
Tighten all bolts and fasteners now
USE HARDWARE KIT
A