Filter
Top Products
www.smoothfitness.com
17
ASSEMBLY
STEP 2: Attach the Upright Post Assembly
Note: Do not tighten the upright post bolts until all four bolts are threaded into the post.
Caution: Do not pinch the wires between the frame
A). Slid the upright sleeve (34) on to the upright post assembly.
B). Attach the upright post assembly to the main frame using 4 x M8xp1.25x16mm socket head bolts (112), 4 x M8 lock
washers (88) and 4 x 8x16x2.0t washers(90).
C). Connect the Pulse Sensor Wire 3 (138) to the Pulse Sensor Wire 2 (137).
D). Connect the Rear Connection Wire (131C) to the Motor Wire (135).
E). Connect the Rear Connection Wire (131B) to the Sensor Wire (134).
F). Connect the Rear Connection Wire (131A) to the Adaptor Connection Wire (132).
G) Slide the upright post sleeve down until it attaches to the main frame covers.
Tighten all bolts and fasteners now
USE HARDWARE KIT
B