Filter
Top Products
www.smoothfitness.com
19
ASSEMBLY
STEP 4: Attach the Console Sleeve Assembly and Water Bottle bracket
A). Slide the console sleeve assembly (39) (40) around the upright post.
B) Be certain that the sleeve assembly aligns together properly and the lowest portion of the console bottom cover is
inside the console sleeve assembly.
C). Secure the two sleeves together using 4 x M5xp0.8x15mm round head screws (99)
D). Remove the pre-installed water bottle bracket screws from the console post
E). Line up the water bottle bracket with the upright post as pictured below.
F). Secure the bracket using the previously removed 2 x M5x12mm (151) round head bolts
USE HARDWARE KIT
B
Tuck the lowest
portion of the console
bottom cover under
the sleeve assembly’s
lip
Tighten all bolts and fasteners now