Filter
Top Products
44
TROUBLESHOOTING
NOTE: Do not touch any internal electric wires without consulting the manufacturer.
Treadmill will not start:
Symptom Resolution
Treadmill will not power up
Check the following:
● Make sure the power cord is plugged into a surge
protector, the surge protector is plugged into a properly
grounded outlet and the surge protector is turned on
(refer to the Power Requirements section in this
manual).
● Equipment circuit breaker is in the reset position
● Equipment power switch is in the on position
● Safety key is properly inserted into the computer
console
● Wall outlet is properly functioning with correct voltage
(Have an electrician check for inadequate voltage at
the outlet refer to the Power Requirements section in
this manual)
● House circuit breaker is reset and is the proper size.
(refer to the Power Requirements section in this
manual)
Treadmill stops operation during use
● Safety key is properly inserted into the computer
console
● Equipment circuit breaker is in the reset position
● House circuit breaker is reset, meets proper
requirements and if worn replaced by an electrician.
(refer to the Power Requirements section in this
manual)
● Program time has expired
Treadmill will not incline(Power fold models
only)
● Check for proper positioning of spring knob for
folding(See procedure in owners manual)
Treadmill will not unfold
Power Fold only
● Check for proper positioning of spring knob for
folding(See procedure in owners manual)
Manual Fold only
● Folding locking lever is depressed
Treadmill running belt moves slower than
speed displayed on computer
● Metric/English conversion (See owners manual for ●
Metric/English conversion process)
Treadmill running belt moves slower than
speed displayed on computer
Metric/English conversion (See owners manual for
Metric/English conversion process)
Running belt is not centered
● Treadmill is properly leveled(See procedure in
owners manual)
● Center running belt (See Centering procedure in
owners manual)
Running belt is slipping or hesitating while in
use
● Tension running belt (See process in owners manual)
Treadmill running belt moves slower than
speed displayed on computer
● Metric/English conversion (See owners manual for ●
Metric/English conversion process)
Running belt is not centered
● Treadmill is properly leveled(See procedure in
owners manual)
● Center running belt (See Centering procedure in
owners manual)
Running belt is slipping or hesitating while in
use
● Tension running belt (See process in owners manual)