Filter
Top Products
www.smoothfitness.co.uk 33
COMPUTER OPERATION
LEVEL MIN. LEVEL MAX. LEVEL
1 0 4
2 1 5
3 2 6
4 3 7
5 4 8
6 5 9
7 6 10
8 7 11
9 8 12
10 9.0 13.0
11 10.0 14.0
12 11.0 15.0
During the workout, press the SPEED UP/DOWN buttons to adjust the speed. Users can overwrite the incline level by pressing the
INCLINE UP/DOWN buttons.
COOL DOWN
After the pre-set TIME counts down to 0, treadmill will start a one minute cool down program. The TIME LCD will display COOL and
blink for 10 seconds and continue counting down 50 seconds at speed 2 MPH/3.2KPH. After a one minute cool down, the treadmill
will stop and return to P2 start display. Press STOP/ENTER to go to POWER ON status.
P3 INTERVAL SPEED
If you select the P3 INTERVAL SPEED program, the LCD will show the following:
After completing the user information set up, the SPEED, CALORIES and PULSE LCD display 0. The TIME display shows factory
setting 24:00 and a blinking workout load level shows 1. Press the INCLINE UP/DOWN buttons to adjust the workout load level from
1 to 12 then press the STOP/ENTER button to confirm the setting. Then the TIME LCD will display a blinking 24:00. Press the
INCLINE UP/DOWN buttons to adjust the total workout time and press STOP/ENTER button to confirm the setting.
Press the START button to start the workout. The SPEED start and change follows the pre-set workout load speed chart as below.
The TIME counts down from the set up workout time. The CALORIES and DISTANCE count up from 0. INCLINE LEVEL starts from
level 0.
LEVEL MIN. SPEED MAX. SPEED
1 1.8 3.0
2 2.0 3.4
3 2.2 3.8
4 2.4 4.2
5 2.6 4.6
6 2.8 5.0
7 3.0 5.4
8 3.2 5.8
9 3.4 6.2
10 3.6 6.6
11 3.8 7.0
12 4.0 7.4
During the workout, press the INCLINE UP/DOWN button to adjust the incline level. Users can overwrite the speed by pressing the
SPEED UP/DOWN buttons.
COOL DOWN
After the pre-set TIME counts down to 0, the treadmill will start a one minute cool down program. The TIME LCD will display COOL
and blink for 10 seconds and continue counting down 50 seconds at a speed of 2MPH/3.2KPH. After the one minute cool down, the
treadmill will stop and return to P2 start display. Press STOP/ENTER to go to POWER ON status.