Filter
Top Products
www.smoothfitness.co.uk 23
ASSEMBLY
STEP 6: Assembly base covers
NOTE : Refer to folding instructions on page 27 .
A) Fold up the running deck until it locks in place .
B) Attach Upright Base Cover (302) to the outside of the Left
Upright (301). Secure with two M4x15 mm screw (802).
C) Attach Upright Base Cover (303) to the inside of the Left
Upright (301). Secure with one M4x15 mm screw (802).
D) Attach Upright Base Cover (305) to the outside of the Right
Upright (301). Secure with three M4x15 mm screw (802).
E) Attach Upright Base Cover (304) to the inside of the Right
Upright (301). Secure with one M4x15 mm screw (802).
802
X7