Filter
Top Products
20
ASSEMBLY
STEP 3: Assemble Front Handle Bar
NOTE : Only hand tighten bolts until last step.
A) Place the front handle bar (201) on top of the left and right
upright (301).
B) Secure left side with one # 8 washer (812) and M8x45 mm
Allen bolt (805) in the forward most hole .
C) Secure right side with one # 8 washer (812) and M8x45 mm
Allen bolt (805) in the forward most hole .
D) Connect pulse wire (217) and wire (111) on left and right side
(as shown in diagram) . Then insert the remaining length of the
wire into the front handle bar tube . Tighten all bolts with Allen
Wrench .
805
X2
812
X2